$16.00
Our 2019 Snowflake is handmade in rural Pennsylvania with reclaimed metal. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.
Each piece will have its own subtle differences; they are cut, hammered, and built by hand. The weathered steel has its own imperfections. No two pieces of metal will wear alike. A clear finish is applied to the entire piece.
Each Gatski is a blend of imperfect materials and capable hands.
Size: 6.5″h x 6.5″w
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.
Out of stock
Additional information
Weight | 1 lbs |
---|---|
Dimensions | 10 × 8 × 1 in |
Home & Gift Type | Home Decor |
Add a Review
Be the first to review “2019 Snowflake Ornament” Cancel reply
Drag Chain Side Table
ArchivedModern lines blend with a rich agricultural history in this statement end table. The metal is from the drag chain from a Dion Silage Wagon. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.
It can be used as side table or end table to keep your reading material beneath or is even great for holding drinks on the patio. Each table will have unique variations. Care: Wipe clean with a damp cloth. Size: 22”h x 20”w x 20”dDeer Woods Map
ArchivedTo create this wall sculpture, we were inspired by map symbols and state flowers and animals. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 22"h x 22"w x 7"dFish Hooks
ArchivedThe fish is hand cut from reclaimed metal, and painted with blue milk paint. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The two halves of the fish are then welded together. The hooks are made with metal rod that was cut and bent into shape.
Each fish will have very subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed so you can hang this charming fish hook inside or out. It is easy to hang with either a nail or a screw. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 12” wide by 8" highDeer Head
ArchivedWe created this Deer Head sculpture with reclaimed metal. The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and ground smooth. We then hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the head. Finally we mount the head on a recycled corn planter disk.
The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 18”h x 26”w x 13”d
Reviews(0)
There are no reviews yet.