$360.00
This Bear sculpture is handmade in Pennsylvania from reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The Bear is then hand hammered and arc welded into shape.
Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a clear enamel. This piece can be placed inside or out.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 12″h x 20″w x 5″d
Out of stock
Additional information
Weight | 10 lbs |
---|---|
Dimensions | 12 × 20 × 5 in |
Sculpture Type | Freestanding Sculpture |
Add a Review
Be the first to review “Bear Sculpture” Cancel reply
Drag Chain Side Table
ArchivedModern lines blend with a rich agricultural history in this statement end table. The metal is from the drag chain from a Dion Silage Wagon. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.
It can be used as side table or end table to keep your reading material beneath or is even great for holding drinks on the patio. Each table will have unique variations. Care: Wipe clean with a damp cloth. Size: 22”h x 20”w x 20”dGoat Head
ArchivedWe made this charismatic goat head with reclaimed metal and wood. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape. Finally, we attach it to a reclaimed corn planter disk. We cut the horns from a large block of wood and shape them by hand.
This goat head is sealed with a water-based enamel. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. It’s weight is approximately 16 lbs Care: Wipe clean with a damp cloth. Size: 22”h x 16”w x 14”dGiraffe
ArchivedThis piece is made with reclaimed steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The red was hand painted with milk paint.
The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 18”h x 20”w x 19”dElephant
ArchivedThis Elephant head sculpture is created with reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The Elephant is then hand hammered and welded into shape.
The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. It’s weight is approximately 10lbs Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 20”h x 28”w x 19”d
Reviews(0)
There are no reviews yet.