$65.00
This is our December 2016 limited edition piece. We are creating just 10 of these. It is inscribed with the edition number and the date on the bottom.
This piece was hand-cut with a hand held plasma cutter, and hand-hammered into shape. Ben welded it fixed it to a piece of reclaimed barn wood.
The metal is sealed with a water-based enamel. Each piece will have very subtle variations. We cut them by hand and each piece of metal has slight color differences.
Care: Wipe clean with a damp cloth.
Size: 14.5”h x 12”w x 4”d
Out of stock
Additional information
Weight | 5 lbs |
---|---|
Dimensions | 7 × 6 × 12 in |
Sculpture Type | Freestanding Sculpture |
Add a Review
Be the first to review “December Limited Edition Piece” Cancel reply
Big Elk Head
ArchivedThis large elk head sculpture is handmade in Pennsylvania from reclaimed metal. The head is painted with milk paint. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape. Finally, we attach it to a reclaimed corn planter disk.
Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This piece can be hung inside or out. This head can easily be hung with a nail or screw. It weighs approximately 15lbs. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 30"h x 24"w x 14"dDrag Chain Side Table
ArchivedModern lines blend with a rich agricultural history in this statement end table. The metal is from the drag chain from a Dion Silage Wagon. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.
It can be used as side table or end table to keep your reading material beneath or is even great for holding drinks on the patio. Each table will have unique variations. Care: Wipe clean with a damp cloth. Size: 22”h x 20”w x 20”dEagle
ArchivedWe created this piece using weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The red was hand painted with milk paint.
The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 23”h x 27”w x 5”dDennis the Deer
ArchivedThis deer sculpture is a lovely tabletop accent piece. The metal we use is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each deer will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 15"h x 15"w x 6"d
Reviews(0)
There are no reviews yet.