$485.00
We made this charismatic goat head with reclaimed metal and wood. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape. Finally, we attach it to a reclaimed corn planter disk. We cut the horns from a large block of wood and shape them by hand.
This goat head is sealed with a water-based enamel. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences.
This head can easily be hung with a nail or screw. It’s weight is approximately 16 lbs
Care: Wipe clean with a damp cloth.
Size: 22”h x 16”w x 14”d
Out of stock
Additional information
Weight | 15 lbs |
---|---|
Dimensions | 22 × 16 × 14 in |
Sculpture Type | Wall Sculpture |
Reviews(1)
Add a Review
Add a Review Cancel reply
Deer Woods Map
ArchivedTo create this wall sculpture, we were inspired by map symbols and state flowers and animals. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 22"h x 22"w x 7"dBox Shelf Table
ArchivedWe made this side table from reclaimed steel and reclaimed barn wood. It is handmade by us here in our rural studio in Pennsylvania. We hand cut and welded each piece of steel together.
We created the base of the shelf from a wooden plank rescued from an old barn. The sides of the table are hand-painted with milk paint. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. Size: 28"h x 16"w x 11.5"dEagle
ArchivedWe created this piece using weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The red was hand painted with milk paint.
The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 23”h x 27”w x 5”dDennis the Deer
ArchivedThis deer sculpture is a lovely tabletop accent piece. The metal we use is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each deer will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 15"h x 15"w x 6"d
Could you make this with metal horns so it could be hung outdoors?
Hi, Good to hear from you! Yes, absolutely! We can definitely make this with metal horns. That would be no problem at all. Please do let us know if you have any other questions. I am happy to answer them. Thanks again! Kate