- You cannot add "Antler Table" to the cart because the product is out of stock.
Prize Chicken
$355.00
A prize piece, for sure. We created this chicken entirely from reclaimed metal and barn wood. The chicken was hand cut from wood, carved and sanded to create its shape. its shiny appearance is due to a clear coat of water based enamel. The metal ribbon across the bottom is metal that was also hand cut and welded into place beneath the chicken.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 14”h x 23”w x 2”d
Out of stock
Additional information
| Weight | 10 lbs |
|---|---|
| Dimensions | 14 × 23 × 2 in |
| Sculpture Type | Wall Sculpture |
Add a Review
Be the first to review “Prize Chicken”
Cow
Archived
Deer Woods Map
ArchivedTo create this wall sculpture, we were inspired by map symbols and state flowers and animals. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 22"h x 22"w x 7"d
Drag Chain Side Table
ArchivedModern lines blend with a rich agricultural history in this statement end table. The metal is from the drag chain from a Dion Silage Wagon. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.
It can be used as side table or end table to keep your reading material beneath or is even great for holding drinks on the patio. Each table will have unique variations. Care: Wipe clean with a damp cloth. Size: 22”h x 20”w x 20”d
Deer Head
ArchivedWe created this Deer Head sculpture with reclaimed metal. The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and ground smooth. We then hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the head. Finally we mount the head on a recycled corn planter disk.
The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 18”h x 26”w x 13”d
Reviews(0)
There are no reviews yet.