Shop

Filters

Showing 121–144 of 168 results

View 24/48/All

Sculpture Type

Filter by

Filter by

121-144 of 168 products

  • $80.00

    Custom Sign- Rust Freestanding Letters

    ,
    $80.00
  • $90.00

    Custom Sign- Large Painted Letters

    ,
    $90.00
  • $90.00

    Early Bird Sign

    $90.00

    Early Bird Sign

    A lovely addition to your kitchen or entry way, this sign is handmade by Ben Gatski in Pennsylvania.

    The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The metal is sealed so you can hang this charming sign inside or out. The sign is easy to hang with either a nail or screw.

    Each sign will have very subtle variations. They are cut by hand and each piece of rusty metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: approximately 6″ high x 28″ wide

    $90.00
  • $795.00

    Wishbone Table

    ,
    $795.00

    Wishbone Table

    ,

    This side table is made from reclaimed steel. It is handmade in Pennsylvania by Ben Gatski. Each piece of steel was hand cut and welded together. The base was hand painted with red milk paint.

    Care: Wipe clean with a damp cloth.

    Size: 21″h x 24.5″w x 24.5″d

    $795.00
  • $195.00

    Wall Turtle

    ,
    $195.00

    Wall Turtle

    ,

    We created this lovely turtle from reclaimed metal. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each moth will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  18”h x 12”w x 2.5”d

    $195.00
  • $1,950.00

    Swoop Console Table

    ,
    $1,950.00

    Swoop Console Table

    ,

    Handmade in Pennsylvania by Ben Gatski, this table is made with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. It is painted  with blue milk paint. We make the top with a new piece of US made 11 gauge steel.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 34″h x 48″w x 13″d

    $1,950.00
  • $725.00

    Swirl Table

    ,
    $725.00

    Swirl Table

    ,

    We create this unique table with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. It is painted  with red milk paint. We make the top with a new piece of US made 10 gauge steel.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  27”h x 19”w x 19”d

    $725.00
  • $298.00

    Sunfish

    ,
    $298.00

    Sunfish

    ,

    We created this lovely sea creature from reclaimed metal. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each fish will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    size: 18″h x 23″w x 8″d

    $298.00
  • $440.00

    Steer Head

    ,
    $440.00

    Steer Head

    ,

    This lovely steer head is handmade with reclaimed metal in rural Pennsylvania. The head pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The shapes are then hand hammered and arc welded together to form the head. The head is mounted on a recycled corn planter disk.

    This steer head is sealed with a water-based enamel. It can be hung inside or out. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    It can be hung with a nail or screw.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  12″h x 24″w x 12.5″d

    $440.00
  • $420.00

    Sir Blue

    ,
    $420.00

    Sir Blue

    ,

    Hat’s off to you! This darling man whom we call, “Sir Blue” is handmade in Pennsylvania by Ben Gatski. The metal we use is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.

    The metal is sealed with a water-based enamel. Each man will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 21″h x 17″w x 10″d

    $420.00
  • $355.00

    Sheep

    ,
    $355.00

    Sheep

    ,

    This sheep sculpture is handmade with reclaimed metal steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each sheep will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 12″h x 20″w x 5″d

    $355.00
  • $355.00

    Sailboat

    ,
    $355.00

    Sailboat

    ,

    This free-standing sailboat sculpture is handmade by Ben Gatski in Pennsylvania. It is created with reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. It is then hand hammered and welded into shape.

    The metal is sealed with a water-based enamel. Each sculpture will have subtle variations. They are cut, welded and hammered by hand and each piece of metal has slight color differences.

    Care Instructions: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 20”h x 12”w x 5”d

    $355.00
  • $2,600.00

    Rust Dining Table

    ,
    $2,600.00

    Rust Dining Table

    ,

    This table is handmade by Ben Gatski in Pennsylvania. We made the base from reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We made the top from a new piece of hot rolled steel. We also hand grind all of the edges.

    This table can be placed inside or out. It seats 3-5 people. The metal is sealed with a water-based enamel.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 30”h x 43”w x 43”d

    $2,600.00
  • $2,100.00

    Revolver Console Table

    $2,100.00

    Revolver Console Table

    This striking console, entry or sofa table is made with reclaimed wood and steel. The top is wood that was rescued from a Pennsylvania barn before demolition. The base is made with steel pipe that was welded together. A clear coating was applied to the entire table for a shiny finish.

    Care: Wipe clean with a damp cloth.

    Size: 33.5h x 40.5”w x 12.5”d

    $2,100.00
  • $2,150.00

    Sway Console Table

    ,
    $2,150.00

    Sway Console Table

    ,

    Handmade in Pennsylvania by Ben Gatski, this table is made with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. It is painted  with red milk paint. We make the top with a new piece of US made 11 gauge steel.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  33.5″h x 48″w x 12″d

    $2,150.00
  • $2,200.00

    Red X Console Table

    ,
    $2,200.00

    Red X Console Table

    ,

    This table  is handmade by us here in rural Pennsylvania with sheets of reclaimed metal.  Each table features reclaimed metal hand cut and bent into shape to form the base. The top is made with a new piece of US made 11 gauge steel.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each Table will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store.

    33”h x 48”w x 14”d

    $2,200.00
  • $410.00

    Raven on Stand

    ,
    $410.00

    Raven on Stand

    ,

    This raven sculpture is handmade by us here in rural Pennsylvania. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each raven will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 16″h x 20″w x 14″d

    $410.00
  • $410.00

    Raven for the Wall

    ,
    $410.00

    Raven for the Wall

    ,

    We created this piece with reclaimed, weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each raven will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:   18″h x 20″w x 15″d

    $410.00
  • $12.00

    Planet Symbol Ornaments

    ,
    $12.00

    Planet Symbol Ornaments

    ,

    Bring the the wisdom of lunar gardening to your home with these unique ornaments . Each represents a planet (and the moon) symbol.  Included in this lovely grouping of four are, Venus to symbolize beauty, Moon for the subconscious, Jupiter to promote a positive frame of mind, and of course our home Earth.

    These are handmade by Ben Gatski in Pennsylvania with reclaimed metal. They could dress up a dull wall, add a pinch of texture to anything needing that extra hint of variety, or of course you could hang them on any indoor botanical of your choosing. Let your creativity soar and incorporate these unique ornaments into your home to perfect your decor.

    Price is for one ornament. Please let us know if the “order notes” which symbol you would like.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  5”h x 4”

    $12.00
  • $14.00

    Planet Symbol Garden Markers

    ,
    $14.00

    Planet Symbol Garden Markers

    ,

    Bring the the wisdom of lunar gardening and biodynamic principles to your home and garden with these unique garden markers. Each represents a planet (and the moon) symbol.  Included in this lovely grouping of four are, Venus to symbolize beauty in the garden, the Moon for the subconscious
    Jupiter to promote a positive frame of mind, and of course our home Earth. These can be used in your garden, indoor plant or used in a cut flower arrangement.

    Price is for one garden marker. Please indicate the name of the symbol you would like in your “order notes”

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  16”h x 4”

    $14.00
  • $140.00

    Pig Hooks

    ,
    $140.00

    Pig Hooks

    ,

    This dandy pig hook was created with reclaimed metal.  It is hand painted with milk paint. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The two halves of the pig are then welded together. The hooks are made with metal rod that was cut and bent into shape.

    Each pig will have very subtle variations. They are cut by hand and each piece of metal has slight color differences.

    The metal is sealed so you can hang this charming pig hook inside or out. It is easy to hang with either a nail or a screw.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  12”wide by 10″ high

    $140.00
  • $655.00

    Custom Steel Side Table

    ,
    $655.00

    Custom Steel Side Table

    ,

    Create a truly unique heirloom. Add your name and a special date, or a special phrase to the side of this metal table. We will create it custom just for you. This table is shown with a name on one side and a date on the other side. We can create something similar for you. Each piece of steel was hand cut and welded together.

    This would make a great gift for your 11th anniversary – the year for steel!

    Care: Wipe clean with a damp cloth.

    Please provide your name and date or phrase in the “order notes” when checking out. Or, describe your table in detail via email – [email protected]  If you have any questions at all, we are more than happy to help out.

    Size: 22″h x 20″w x 20″d

    $655.00
  • $6.00

    Small Custom Name or Phrase Signs

    $6.00

    Small Custom Name or Phrase Signs

    These darling little personalized signs are perfect for special occasions every day decoration. Each sign is hand-cut with reclaimed metal

    The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter.  The metal is sealed so you can set this charming little sign inside or out.

    Each sign will have very subtle variations. They are cut by hand and each piece of rusty metal has slight color differences.

    The price is for one letter, you will need to order the quantity of letters you need for your name or phrase. Please let us know what name or phrase you would like in the “order notes” when you checkout.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 2-2 1/2 “ h x 2” d ( length depends on # of letters, each letter is approx. 1 1/2 “wide)

    $6.00
  • $310.00

    Octopus

    $310.00

    Octopus

    We created this lovely sea creature entirely from reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.

    The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    This sculpture can easily be hung with a nail or screw.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 17″w x 16″h x 15″d

    $310.00