Shop

Filters

Showing 145–168 of 168 results

View 24/48/All

Sculpture Type

Filter by

Filter by

145-168 of 168 products

  • $475.00

    Murray the Moose

    ,
    $475.00

    Murray the Moose

    ,

    We created this moose head wall sculpture with reclaimed metal. The antlers were painted with blue milk paint. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hammer and arc weld the moose into shape. The head is mounted on a recycled corn planter disk.

    The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences.

    This head can easily be hung with a nail or screw. The weight is approximately 12lbs.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  19”h x 24”w x 7”d

    $475.00
  • $2,600.00

    Blossom Dining Table

    ,
    $2,600.00

    Blossom Dining Table

    ,

    We create this unique table with reclaimed steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We make the top with a new piece of hot rolled steel.

    This table can be placed inside or out. It seats 3-5 people. The metal is sealed with a water-based enamel.

    This table is made to order.  Please inquire about custom sizes.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 30”h x 43”w x 43”d

    $2,600.00
  • $485.00

    Mounted Fish

    ,
    $485.00

    Mounted Fish

    ,

    We created this fish sculpture with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hammer and weld the fish into shape.  It is hand painted with milk paint.  Finally, we attach it to a reclaimed corn planter disk.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each fish will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    This fish can easily be hung with a nail or screw.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 16”h x 37”w x 5”d

    $485.00
  • $495.00

    Moose Woods Map

    ,
    $495.00

    Moose Woods Map

    ,

    We were inspired by map symbols and state flowers and animals, in creating this piece. It was handmade with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 22″h x 22″w x 8″d

    $495.00
  • $3,200.00

    Moonlight Credenza

    ,
    $3,200.00

    Moonlight Credenza

    ,

    We created this piece with reclaimed metal and wood. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.

    There is one interior shelf, and two narrow niches on each side.

    The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth.

    Size:  32”h x 60”w x 24.5”d

    $3,200.00
  • $575.00

    Lion Head

    ,
    $575.00

    Lion Head

    ,

    We created this Lion Head with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The yellow was hand painted with milk paint.

    The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  27”h x 27”w x 8”d

    $575.00
  • $1,320.00

    Large Deer Head

    ,
    $1,320.00

    Large Deer Head

    ,

    Bring home a real trophy. We created this Deer Head entirely from reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape.  The antlers start out as flat pieces of rusty metal, we hand hammer them into shape and grind them smooth. They are made shiny with a hand held grinder. Finally, we attach it to a reclaimed corn planter disk.

    The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    This head can easily be hung with a nail or screw. The weight is approximately 15lbs.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 37.5”h x 34.5w x 29”d

    $1,320.00
  • $465.00

    Goat Head

    ,
    $465.00

    Goat Head

    ,

    We made this charismatic goat head with reclaimed metal and wood.  We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape. Finally, we attach it to a reclaimed corn planter disk. We cut the horns from a large block of wood and shape them by hand.

    This goat head is sealed with a water-based enamel.  Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    This head can easily be hung with a nail or screw. It’s weight is approximately 16 lbs

    Care:  Wipe clean with a damp cloth.

    Size:  22”h x 16”w x 14”d

    $465.00
    Rated 5.00 out of 5
  • $485.00

    Giraffe

    ,
    $485.00

    Giraffe

    ,

    This piece is made with reclaimed steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The red was hand painted with milk paint.

    The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  18”h x 20”w x 19”d

    $485.00
  • $495.00

    Elk Head

    ,
    $495.00

    Elk Head

    ,

    We created this Elk head sculpture with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and grind them smooth.  Finally we mount the head on a recycled corn planter disk.

    The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences.

    This head can easily be hung with a nail or screw. It’s weight is approximately 15 lbs

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 26”h x 16”w x 13”d

    $495.00
  • $465.00

    Elephant

    ,
    $465.00

    Elephant

    ,

    This Elephant head sculpture is created with reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The Elephant is then hand hammered and welded into shape.

    The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    This head can easily be hung with a nail or screw. It’s weight is approximately 10lbs

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  20”h x 28”w x 19”d

    $465.00
  • $485.00

    Eagle

    ,
    $485.00

    Eagle

    ,

    We created this piece using weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The red was hand painted with milk paint.

    The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  23”h x 27”w x 5”d

    $485.00
  • $725.00

    Drag Chain Side Table

    ,
    $725.00

    Drag Chain Side Table

    ,

    Modern lines blend with a rich agricultural history in this statement end table. The metal is from the drag chain from a Dion Silage Wagon. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.

    It can be used as side table or end table to keep your reading material beneath or is even great for holding drinks on the patio. Each table will have unique variations.

    Care:  Wipe clean with a damp cloth.

    Size: 22”h x 20”w x 20”d

    $725.00
  • $470.00

    Deer Woods Map

    ,
    $470.00

    Deer Woods Map

    ,

    To create this wall sculpture, we were inspired by map symbols and state flowers and animals. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 22″h x 22″w x 7″d

    $470.00
  • $330.00

    Cricket

    ,
    $330.00

    Cricket

    ,

    This piece was handmade by Ben Gatski in Pennsylvania. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.

    The metal is sealed with a water-based enamel. Each man will have subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    $330.00
  • $375.00

    Cow Over Moon

    ,
    $375.00

    Cow Over Moon

    ,

    We created this cow over the moon sculpture with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and arc weld the cow into shape. It is hand painted with milk paint.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each Cow will have subtle variations. We cut them by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  21”h x 18”w x 6”d

    $375.00
  • $365.00

    Cow

    ,
    $365.00

    Cow

    ,

    This Cow sculpture is handmade in Pennsylvania by Ben Gatski. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.

    Each cow will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This piece can be placed inside or out.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 13″h x 22″w x 54″d

    $365.00
  • $54.00

    Capital Eat Letters

    $54.00

    Capital Eat Letters

    These lovely EAT Letters can be used in many creative ways.  They are made with reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter.  The metal is sealed so you can hang these letters inside or out.  It is easy to hang with either a nail or screw.

    Each letters will have very subtle variations. They are cut by hand and each piece of rusty metal has slight color differences.

    We can make these style letters in custom words and phrases. Please see our custom typography for that option.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 8″h x 2.6″w (E), 8″h x 3″w (A), 8″h x 1.4″w (T)

    $54.00
  • $770.00

    Blue Circle Table

    ,
    $770.00

    Blue Circle Table

    ,

    We created this table by hand hammering flat metal into shape and welding it together. We cut out the circle shape and hammer it into form. We then hang a recycled piece of chain from a harvesting machine in the middle, and hand paint the circle with blue milk paint. We make the top with a new piece of US made 10 gauge steel.

    It can be used indoors or outdoors – perfect as side table or great for holding drinks on the patio.

    Each table will have unique variations. They are cut by hand and each piece of metal has slight color differences. Weight:  approximately 30lbs

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 28”h x 20”w x 18”d

    $770.00
  • $80.00

    Big Solid Letter

    $80.00

    Big Solid Letter

    We created these letters as a statement piece that can be used in many creative ways. Whether for the living room or office, these letters will add a bit of personality to the room. These wonderful letters may be the perfect gift for a birthday, anniversary, or any other significant time of year!

    We made them out of reclaimed metal and hand cut and welded them into shape. We hand draw the pattern on the metal with soapstone and cut with a hand held plasma cutter.

    Each letter will have very subtle variations. They are cut by hand and each piece of metal has slight color differences.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  12”h x 8”w x 4”d

    $80.00
  • $1,980.00

    Big O Console – Rust & Blue

    ,
    $1,980.00

    Big O Console – Rust & Blue

    ,

    Inspire your home with this statement piece – a console, entry or sofa table made with reclaimed steel.  The colors on this table are hand-painted with milk paint. Each table features a piece of recycled steel that was hand rolled and welded to form the base, with a new piece of US made 10 gauge steel top. A clear coating was applied to the entire table for a shiny finish.

    Please do inquire for custom colors (in the third photo, you can see a red table being made).

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 33”h x 42”w x 14”d

    $1,980.00
  • $460.00

    Bernie the Bear

    ,
    $460.00

    Bernie the Bear

    ,

    This Bear Head sculpture is handmade in Pennsylvania from reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The Bear is then hand hammered and arc welded into shape.

    Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This piece can be placed inside or out.

    This head can easily be hung with a nail or screw. It weighs approximately 10lbs.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 17”h x 16”w x 14”d

    $460.00
  • $1,210.00

    Angle Iron Metal and Wood Table

    $1,210.00

    Angle Iron Metal and Wood Table

    Modern lines blend with a rich agricultural history in this statement end table. The metal is from an angle iron John Deere Disk that was horse drawn (the final photo shows this piece in it’s raw form). We rescued the wooden beams from an old Pennsylvania barn before demolition. We sawed them into pieces and sanded them down to shape. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.

    Care:  Wipe clean with a damp cloth.

    Size:  25″h x 26″w x 17″d

    $1,210.00
  • $2,200.00

    Big O Console Table

    ,
    $2,200.00

    Big O Console Table

    ,

    Inspire your home with this statement piece- a console, entry or sofa table made with reclaimed steel. The colors on this table are hand-painted with milk paint. Each table features a piece of recycled steel that was hand rolled and welded to form the base, with a new piece of US made 10 gauge steel top. A clear coating was applied to the entire table for a shiny finish.

    size: 33”h x 42”w x 14”d

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store.

    $2,200.00