$290.00
Go! Go! Go! We were inspired to create this sculpture by a dear customer who is a triathlete. We appreciate the freedom of getting out there and going like the wind! It is handmade with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.
Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 20”h x 13”w x 6”d
Out of stock
Additional information
Weight | 28 lbs |
---|---|
Dimensions | 25 × 17 × 13 in |
Sculpture Type | Freestanding Sculpture |
Add a Review
Be the first to review “Runner” Cancel reply
Deer Head
ArchivedWe created this Deer Head sculpture with reclaimed metal. The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and ground smooth. We then hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the head. Finally we mount the head on a recycled corn planter disk.
The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 18”h x 26”w x 13”dBuffalo Head
ArchivedOur buffalo head is handmade with reclaimed metal. We hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. The shapes are then arc welded together to form the head. We hand hammer the eyes on and mount the head on a recycled corn planter disk.
The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. The weight is approximately 15 lbs Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 18"h x 21"w x 12"dGear Table
ArchivedThis side table is handmade with reclaimed gears. We welded each gear to form the base. This table features a new piece of US made 10 gauge steel top.
It can be used indoors or outdoors and is perfect as an accent to your favorite arm-chair or great for holding drinks on the patio. The table has adjustable chrome feet perfect for any surface. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 23”h x 22”w x 22”dCricket
ArchivedThis piece was handmade by Ben Gatski in Pennsylvania. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.
The metal is sealed with a water-based enamel. Each man will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Reviews(0)
There are no reviews yet.