Poinsettia Ornament
$22.00
We created this darling little poinsettia flower ornament with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter.
Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 6”h x 6”w x 2”d
Out of stock
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 15 × 10 × 1 in |
| Home & Gift Type | Home Decor |
Add a Review
Be the first to review “Poinsettia Ornament”
Blaze the Bull
ArchivedWe created this bull head sculpture from reclaimed metal. The head is painted with red milk paint. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and arc weld it into shape. The head is mounted on a recycled corn planter disk.
Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This head can easily be hung with a nail or screw. It's weight is approximately 15 lbs Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 17”h x 26”w x 7”d
Lion Head
ArchivedWe created this Lion Head with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The yellow was hand painted with milk paint.
The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 27”h x 27”w x 8”d
Dennis the Deer
ArchivedThis deer sculpture is a lovely tabletop accent piece. The metal we use is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each deer will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 15"h x 15"w x 6"d
Deer Head
ArchivedWe created this Deer Head sculpture with reclaimed metal. The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and ground smooth. We then hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the head. Finally we mount the head on a recycled corn planter disk.
The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 18”h x 26”w x 13”d
Reviews(0)
There are no reviews yet.