Box Shelf Table
$550.00
We made this side table from reclaimed steel and reclaimed barn wood. It is handmade by us here in our rural studio in Pennsylvania. We hand cut and welded each piece of steel together.
We created the base of the shelf from a wooden plank rescued from an old barn. The sides of the table are hand-painted with milk paint.
Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel.
Care: Wipe clean with a damp cloth.
Size: 28″h x 16″w x 11.5″d
Additional information
| Weight | 25 lbs |
|---|---|
| Dimensions | 28 × 16 × 12 in |
| Furniture Type | Side Table |
Add a Review
Be the first to review “Box Shelf Table”
Steel Angle Side Table
ArchivedHandmade in Pennsylvania by Ben Gatski, the Steel Angle Table is made with reclaimed metal. The base is made by hand hammering flat metal into shape and welding it together. The top is made with a new piece of US made 10 gauge steel top.
It can be used indoors or outdoors – perfect as side table or great for holding drinks on the patio. Each table will have unique variations. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 28.5”h x 28”w x 20”d
Drag Chain Side Table
ArchivedModern lines blend with a rich agricultural history in this statement end table. The metal is from the drag chain from a Dion Silage Wagon. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.
It can be used as side table or end table to keep your reading material beneath or is even great for holding drinks on the patio. Each table will have unique variations. Care: Wipe clean with a damp cloth. Size: 22”h x 20”w x 20”d
Daybreak Side Table
Furniture
Blaze the Bull
ArchivedWe created this bull head sculpture from reclaimed metal. The head is painted with red milk paint. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and arc weld it into shape. The head is mounted on a recycled corn planter disk.
Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This head can easily be hung with a nail or screw. It's weight is approximately 15 lbs Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 17”h x 26”w x 7”d
Reviews(0)
There are no reviews yet.