Flavor Sign
$42.00
Each sign is hand-cut from reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The metal is sealed so you can hang this charming little sign inside or out. The sign is easy to hang with either a nail or screw.
Each sign will have very subtle variations. They are cut by hand and each piece of rusty metal has slight color differences.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 4″h x 12.5″w
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 13 × 4 × .5 in |
| Home & Gift Type | Typography |
Add a Review
Be the first to review “Flavor Sign”
Eagle
ArchivedWe created this piece using weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The red was hand painted with milk paint.
The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 23”h x 27”w x 5”d
Garden Chairs
ArchivedThese chairs were handmade by Ben Gatski in rural Pennsylvania. They were created using the fenders from a 350 Farmall and reclaimed barn wood. We hand cut and shaped the wood to create the ideal seating arrangement for you.
These chairs would be ideal for sipping drinks in your patio or garden. They were sealed with a clear enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look by applying a clear polyurethane, available in a spray can at your local hardware store. Size: 40”h x 26”w x 40”d
Goat Head
ArchivedWe made this charismatic goat head with reclaimed metal and wood. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape. Finally, we attach it to a reclaimed corn planter disk. We cut the horns from a large block of wood and shape them by hand.
This goat head is sealed with a water-based enamel. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. It’s weight is approximately 16 lbs Care: Wipe clean with a damp cloth. Size: 22”h x 16”w x 14”d
Reviews(0)
There are no reviews yet.