This striking cabinet is handmade with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then weld it into shape. The blue color is hand-painted milk paint.
There are two interior heavy metal shelves in this cabinet, and they can be placed in different locations.
The metal is sealed with a water-based enamel. Each cabinet will have subtle variations. They are cut by hand and each piece of metal has slight color differences.
Handmade in Pennsylvania by Ben Gatski, this table is made with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. It is painted with blue milk paint. We make the top with a new piece of US made 11 gauge steel.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 34"h x 48"w x 13"d
This table is handmade by us in our rural shop here in Pennsylvania. Each table features reclaimed metal hand cut and bent into shape. The top is made with a new piece of US made 11 gauge steel. The base is hand-painted with milk paint.
The “drop” inside the table can be used to keep a few magazines or books.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 17”h x 46”w x 24”d
This side table is made from reclaimed steel. It is handmade in Pennsylvania by Ben Gatski. Each piece of steel was hand cut and welded together. The base was hand painted with red milk paint.
Care: Wipe clean with a damp cloth.
Size: 21"h x 24.5"w x 24.5"d
Modern lines blend with a rich agricultural history in this statement end table. The metal is from an angle iron John Deere Disk that was horse drawn (the final photo shows this piece in it's raw form). We rescued the wooden beams from an old Pennsylvania barn before demolition. We sawed them into pieces and sanded them down to shape. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.