$140.00
This dandy pig hook was created with reclaimed metal. It is hand painted with milk paint. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The two halves of the pig are then welded together. The hooks are made with metal rod that was cut and bent into shape.
Each pig will have very subtle variations. They are cut by hand and each piece of metal has slight color differences.
The metal is sealed so you can hang this charming pig hook inside or out. It is easy to hang with either a nail or a screw.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 12”wide by 10″ high
Out of stock
Additional information
Weight | 8 lbs |
---|---|
Dimensions | 12 × 10 × 4 in |
Home & Gift Type | Hooks |
Add a Review
Be the first to review “Pig Hooks” Cancel reply


Goat Head
ArchivedWe made this charismatic goat head with reclaimed metal and wood. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape. Finally, we attach it to a reclaimed corn planter disk. We cut the horns from a large block of wood and shape them by hand.
This goat head is sealed with a water-based enamel. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. It’s weight is approximately 16 lbs Care: Wipe clean with a damp cloth. Size: 22”h x 16”w x 14”d

Blaze the Bull
ArchivedWe created this bull head sculpture from reclaimed metal. The head is painted with red milk paint. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and arc weld it into shape. The head is mounted on a recycled corn planter disk.
Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This head can easily be hung with a nail or screw. It's weight is approximately 15 lbs Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 17”h x 26”w x 7”d

Eagle
ArchivedWe created this piece using weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The red was hand painted with milk paint.
The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 23”h x 27”w x 5”d

Drag Chain Side Table
ArchivedModern lines blend with a rich agricultural history in this statement end table. The metal is from the drag chain from a Dion Silage Wagon. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.
It can be used as side table or end table to keep your reading material beneath or is even great for holding drinks on the patio. Each table will have unique variations. Care: Wipe clean with a damp cloth. Size: 22”h x 20”w x 20”d
Reviews(0)
There are no reviews yet.