$325.00
We created this lovely sea creature from reclaimed metal. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each fish will have subtle variations. They are cut by hand and each piece of metal has slight color differences.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
size: 18″h x 23″w x 8″d
Out of stock
Additional information
Weight | 10 lbs |
---|---|
Dimensions | 18 × 23 × 8 in |
Sculpture Type | Freestanding Sculpture |
Add a Review
Be the first to review “Sunfish” Cancel reply


Lion Head
ArchivedWe created this Lion Head with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The yellow was hand painted with milk paint.
The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 27”h x 27”w x 8”d

Deer Woods Map
ArchivedTo create this wall sculpture, we were inspired by map symbols and state flowers and animals. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 22"h x 22"w x 7"d

Cow Over Moon
ArchivedWe created this cow over the moon sculpture with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and arc weld the cow into shape. It is hand painted with milk paint.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each Cow will have subtle variations. We cut them by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 21”h x 18”w x 6”d

Goat Head
ArchivedWe made this charismatic goat head with reclaimed metal and wood. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape. Finally, we attach it to a reclaimed corn planter disk. We cut the horns from a large block of wood and shape them by hand.
This goat head is sealed with a water-based enamel. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. It’s weight is approximately 16 lbs Care: Wipe clean with a damp cloth. Size: 22”h x 16”w x 14”d
Reviews(0)
There are no reviews yet.