$240.00
We created this lovely turtle from reclaimed metal. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each moth will have subtle variations. They are cut by hand and each piece of metal has slight color differences.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 18”h x 12”w x 2.5”d
Additional information
Weight | 8 lbs |
---|---|
Dimensions | 18 × 12 × 2 in |
Sculpture Type | Wall Sculpture |
Add a Review
Be the first to review “Wall Turtle” Cancel reply
Blaze the Bull
ArchivedWe created this bull head sculpture from reclaimed metal. The head is painted with red milk paint. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and arc weld it into shape. The head is mounted on a recycled corn planter disk.
Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This head can easily be hung with a nail or screw. It's weight is approximately 15 lbs Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 17”h x 26”w x 7”dDrag Chain Side Table
ArchivedModern lines blend with a rich agricultural history in this statement end table. The metal is from the drag chain from a Dion Silage Wagon. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.
It can be used as side table or end table to keep your reading material beneath or is even great for holding drinks on the patio. Each table will have unique variations. Care: Wipe clean with a damp cloth. Size: 22”h x 20”w x 20”dDennis the Deer
ArchivedThis deer sculpture is a lovely tabletop accent piece. The metal we use is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each deer will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 15"h x 15"w x 6"dGiraffe
ArchivedThis piece is made with reclaimed steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The red was hand painted with milk paint.
The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 18”h x 20”w x 19”d
Reviews(0)
There are no reviews yet.