Wolf Head
Additional information
| Sculpture Type | Wall Sculpture |
|---|
Add a Review
Be the first to review “Wolf Head”
Dennis the Deer
ArchivedThis deer sculpture is a lovely tabletop accent piece. The metal we use is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each deer will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 15"h x 15"w x 6"d
Drag Chain Side Table
ArchivedModern lines blend with a rich agricultural history in this statement end table. The metal is from the drag chain from a Dion Silage Wagon. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.
It can be used as side table or end table to keep your reading material beneath or is even great for holding drinks on the patio. Each table will have unique variations. Care: Wipe clean with a damp cloth. Size: 22”h x 20”w x 20”d
Antler Table
ArchivedWe made this darling side table with reclaimed metal. Each shape is cut by hand. The antler starts out as flat pieces of rusty metal. We then hand hammer it into shape and grind it smooth. We then top this table off with a piece of US made 11 guage sheet steel.
The metal is sealed with a water-based enamel. Each table will have subtle variations.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 24”h x 14”w x 14”d
I was surprised to receive the table yesterday....it was so quick! It is the perfect table for the space and so beautiful. It has a very cool industrial and elegant vibe and is the perfect size for a drink and a book/iPad.
Deer Head
ArchivedWe created this Deer Head sculpture with reclaimed metal. The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and ground smooth. We then hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the head. Finally we mount the head on a recycled corn planter disk.
The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 18”h x 26”w x 13”d
Reviews(0)
There are no reviews yet.