$330.00
We created this lovely butterfly from reclaimed metal. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each moth will have subtle variations. They are cut by hand and each piece of metal has slight color differences.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
size: 22″h x 30″w x 9″d
Out of stock
Additional information
Weight | 10 lbs |
---|---|
Dimensions | 22 × 30 × 9 in |
Sculpture Type | Wall Sculpture |
Add a Review
Be the first to review “Butterfly” Cancel reply
Shooting Star
Wall Sculpture, Sculpture, WholesaleMake a magical gallery wall with this 3d metal art! This wall sculpture could be a focal piece above your entryway table, or join an eclectic collection on your living room wall. It would make a very special new home gift or perfect for the star gazer on your list.
This Shooting Star is handmade in rural Pennsylvania with reclaimed metal.
The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.
Each piece will have its own subtle differences; they are cut, hammered, and built by hand.
The color is hand-painted with milk paint, giving the piece a naturally uneven and textured finish. A clear finish is applied to the entire piece.
There is a small hanger on the back, which you can use to easily hang this piece on a nail or a screw.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.
Size: 15"h x 31"w x 5"d
Drag Chain Side Table
ArchivedModern lines blend with a rich agricultural history in this statement end table. The metal is from the drag chain from a Dion Silage Wagon. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.
It can be used as side table or end table to keep your reading material beneath or is even great for holding drinks on the patio. Each table will have unique variations. Care: Wipe clean with a damp cloth. Size: 22”h x 20”w x 20”dDeer Woods Map
ArchivedTo create this wall sculpture, we were inspired by map symbols and state flowers and animals. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 22"h x 22"w x 7"dBlaze the Bull
ArchivedWe created this bull head sculpture from reclaimed metal. The head is painted with red milk paint. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and arc weld it into shape. The head is mounted on a recycled corn planter disk.
Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This head can easily be hung with a nail or screw. It's weight is approximately 15 lbs Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 17”h x 26”w x 7”d
Reviews(0)
There are no reviews yet.