$65.00
This is our December 2016 limited edition piece. We are creating just 10 of these. It is inscribed with the edition number and the date on the bottom.
This piece was hand-cut with a hand held plasma cutter, and hand-hammered into shape. Ben welded it fixed it to a piece of reclaimed barn wood.
The metal is sealed with a water-based enamel. Each piece will have very subtle variations. We cut them by hand and each piece of metal has slight color differences.
Care: Wipe clean with a damp cloth.
Size: 14.5”h x 12”w x 4”d
Out of stock
Additional information
Weight | 5 lbs |
---|---|
Dimensions | 7 × 6 × 12 in |
Sculpture Type | Freestanding Sculpture |
Add a Review
Be the first to review “December Limited Edition Piece” Cancel reply


Deer Head
ArchivedWe created this Deer Head sculpture with reclaimed metal. The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and ground smooth. We then hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the head. Finally we mount the head on a recycled corn planter disk.
The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 18”h x 26”w x 13”d

Dennis the Deer
ArchivedThis deer sculpture is a lovely tabletop accent piece. The metal we use is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each deer will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 15"h x 15"w x 6"d

Fish Hooks
ArchivedThe fish is hand cut from reclaimed metal, and painted with blue milk paint. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The two halves of the fish are then welded together. The hooks are made with metal rod that was cut and bent into shape.
Each fish will have very subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed so you can hang this charming fish hook inside or out. It is easy to hang with either a nail or a screw. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 12” wide by 8" high

Goat Head
ArchivedWe made this charismatic goat head with reclaimed metal and wood. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape. Finally, we attach it to a reclaimed corn planter disk. We cut the horns from a large block of wood and shape them by hand.
This goat head is sealed with a water-based enamel. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. It’s weight is approximately 16 lbs Care: Wipe clean with a damp cloth. Size: 22”h x 16”w x 14”d
Reviews(0)
There are no reviews yet.