Additional information
| Sculpture Type | Wall Sculpture |
|---|
Add a Review
Be the first to review “Elk Head with Red Face”
Box Shelf Table
ArchivedWe made this side table from reclaimed steel and reclaimed barn wood. It is handmade by us here in our rural studio in Pennsylvania. We hand cut and welded each piece of steel together.
We created the base of the shelf from a wooden plank rescued from an old barn. The sides of the table are hand-painted with milk paint. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. Size: 28"h x 16"w x 11.5"d
Eagle
ArchivedWe created this piece using weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The red was hand painted with milk paint.
The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 23”h x 27”w x 5”d
Goat Head
ArchivedWe made this charismatic goat head with reclaimed metal and wood. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape. Finally, we attach it to a reclaimed corn planter disk. We cut the horns from a large block of wood and shape them by hand.
This goat head is sealed with a water-based enamel. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. It’s weight is approximately 16 lbs Care: Wipe clean with a damp cloth. Size: 22”h x 16”w x 14”d
Big Elk Head
ArchivedThis large elk head sculpture is handmade in Pennsylvania from reclaimed metal. The head is painted with milk paint. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape. Finally, we attach it to a reclaimed corn planter disk.
Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This piece can be hung inside or out. This head can easily be hung with a nail or screw. It weighs approximately 15lbs. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 30"h x 24"w x 14"d
Reviews(0)
There are no reviews yet.