Revolver Console Table
$2,100.00
This striking console, entry or sofa table is made with reclaimed wood and steel. The top is wood that was rescued from a Pennsylvania barn before demolition. The base is made with steel pipe that was welded together. A clear coating was applied to the entire table for a shiny finish.
Care: Wipe clean with a damp cloth.
Size: 33.5h x 40.5”w x 12.5”d
Additional information
| Weight | 100 lbs |
|---|---|
| Dimensions | 33 x 40 x 12 in |
| Furniture Type | Console Table |
Add a Review
Be the first to review “Revolver Console Table”
Orbit Side Table
Furniture, WholesaleWe created this table from reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. It is hand-painted with red milk paint.
This table complements our Sun Ray Console table.
Each table will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 24”h x 24”w x 24”d
Angle Iron Metal and Wood Table
FurnitureModern lines blend with a rich agricultural history in this statement end table. The metal is from an angle iron John Deere Disk that was horse drawn (the final photo shows this piece in it’s raw form). We rescued the wooden beams from an old Pennsylvania barn before demolition. We sawed them into pieces and sanded them down to shape. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.
Care: Wipe clean with a damp cloth.
Size: 25″h x 26″w x 17″d
Sway Console Table
Furniture, WholesaleHandmade in Pennsylvania by Ben Gatski, this table is made with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. It is painted with red milk paint. We make the top with a new piece of US made 11 gauge steel.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 33.5″h x 48″w x 12″d
Cylinder Side Table
Furniture, WholesaleWe weld reclaimed sheet metal together to form the base, and use a new piece of US made 11 gauge steel for the top.
This table can easily be used indoors or outdoors.
Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store.
Size: 20”h x 10”w x 10”d
Reviews(0)
There are no reviews yet.