Additional information
| Sculpture Type | Freestanding Sculpture |
|---|
Add a Review
Be the first to review “Pig”
Garden Chairs
ArchivedThese chairs were handmade by Ben Gatski in rural Pennsylvania. They were created using the fenders from a 350 Farmall and reclaimed barn wood. We hand cut and shaped the wood to create the ideal seating arrangement for you.
These chairs would be ideal for sipping drinks in your patio or garden. They were sealed with a clear enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look by applying a clear polyurethane, available in a spray can at your local hardware store. Size: 40”h x 26”w x 40”d
Big Elk Head
ArchivedThis large elk head sculpture is handmade in Pennsylvania from reclaimed metal. The head is painted with milk paint. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape. Finally, we attach it to a reclaimed corn planter disk.
Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This piece can be hung inside or out. This head can easily be hung with a nail or screw. It weighs approximately 15lbs. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 30"h x 24"w x 14"d
Drag Chain Side Table
ArchivedModern lines blend with a rich agricultural history in this statement end table. The metal is from the drag chain from a Dion Silage Wagon. We cut and shaped a piece of recycled steel into place. Then applied a clear coating to the entire table for a shiny finish.
It can be used as side table or end table to keep your reading material beneath or is even great for holding drinks on the patio. Each table will have unique variations. Care: Wipe clean with a damp cloth. Size: 22”h x 20”w x 20”d
Deer Woods Map
ArchivedTo create this wall sculpture, we were inspired by map symbols and state flowers and animals. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.
The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 22"h x 22"w x 7"d
Reviews(0)
There are no reviews yet.