[email protected] | 570.387.6326 | Free US Shipping on all orders Over $25

Shop

Filters

Showing 97–120 of 159 results

Sculpture Type

Filter by

Filter by

97-120 of 159 products

  • $510.00

    Cat Sculpture

    ,
    $510.00

    Cat Sculpture

    ,

    This Cat sculpture is handmade in Pennsylvania from reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The Cat is then hand hammered and arc welded into shape. The color is created with natural milk paint.

    Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a clear enamel. This piece can be placed inside or out.

    Care:  Wipe clean with a damp cloth.

    Size:  21"h x 12"w x 16"d

    $510.00
  • $795.00

    Mark Side Table

    ,
    $795.00

    Mark Side Table

    ,

    Mark your favorite armchair by pairing it with this "on target" table! We created this table from reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.

    Each table will have subtle variations. They are cut by hand and each piece of metal has slight color differences.  The metal is sealed with a water-based enamel.

    This table is approximately 40lbs.

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  22"h x 24"w x 24"d

    $795.00
  • $2,550.00

    Counterbalance Console Table

    , ,
    $2,550.00

    Counterbalance Console Table

    , ,

    Create an artistic entryway (or living space) with this strong and elegant console table. This unique console table was handmade here in Pennsylvania. To create the body of the table we hand cut reclaimed sheet metal and weld it into shape. To create the wood top we hand cut, plane and sand reclaimed wood from an old barn.

    Each table will have unique variations, no pieces of metal will wear alike.  We are always happy to email you a photo prior to shipping- simply contact us.

    This table is approximately 70lbs.

    Size:  34"h x 48"w x 14"d

    Care: Wipe clean with a damp cloth.

    $2,550.00
  • $490.00

    Cat Wall Sculpture

    , ,
    $490.00

    Cat Wall Sculpture

    , ,

    Make a statement on your wall with this fun cat wall sculpture. It is created with reclaimed metal. We hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the head. We paint it with all natural milk paint.

    The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations.

    This head can easily be hung with a nail or screw.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  20"h x 24"w x9"d

    $490.00
  • $525.00

    Bat Sculpture

    , , ,
    We had fun creating this unique bat sculpture. We imagined this for the garden but it would be fun in any indoor or outdoor space. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each anchor will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. 39”h x 29”w x 8”d
    $525.00
  • $2,400.00

    Crescent Moon Bench

    ,
    $2,400.00

    Crescent Moon Bench

    ,
    Grab a drink, and enjoy your calming garden spaces from this bench. It is handmade with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The metal is sealed with a water-based enamel. Please note that this is a very heavy piece, it’s weight is approximately 200 lbs Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  20”h x 48”w x 18”d
    $2,400.00
  • $610.00

    Roxy the Reindeer

    , ,
    $610.00

    Roxy the Reindeer

    , ,
    Meet Roxy! We created this animal head entirely from reclaimed metal.  The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and grind them smooth. We then hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the head. Finally we mount the head on a recycled corn planter disk. The color is hand-painted milk paint. The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. The weight is approximately 10lbs Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. 26”h x 22”w x 13”d
    $610.00
  • $630.00

    Star Table

    , ,
    $630.00

    Star Table

    , ,
    This lovely side table is handmade with reclaimed metal. It is in a crescent moon shape. To create this piece, we hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.  The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. 20”h x 19”w x 14”d
    $630.00
  • $84.00

    Good Time Sign

    ,
    $84.00

    Good Time Sign

    ,
    This sign is handmade with reclaimed metal steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each sign will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. 8”h x 38”w
    $84.00
  • $255.00

    Anchor

    , ,
    This anchor sculpture is handmade with reclaimed metal steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. It can be used as a simple decorative piece or as a wine bottle holder. The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each anchor will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. 16”h x 14”w x 12”d
    $255.00
  • $550.00

    Whale

    , ,
    This whale sculpture is handmade with reclaimed metal steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The color is milk paint we apply by hand. The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each whale will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. 24”h x 33”w x 6”d
    $550.00
  • $565.00

    Deputy Dog

    , , ,
    This fun dog sculpture is handmade with reclaimed metal steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each dog will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  25”h x 7”w x 14”d
    $565.00
  • $1,400.00

    Cornucopia Garden Sculpture

    , ,
    $1,400.00

    Cornucopia Garden Sculpture

    , ,
    This statement sculpture is handmade with reclaimed metal washers. Ben creates a steel frame in which he individually welds each small, unique washer into place. It would be a great statement piece in your garden! The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each piece will have subtle variations. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  61”h x 38”w x 13”d
    $1,400.00
  • $290.00

    Runner

    , ,
    Go! Go! Go! We were inspired to create this sculpture by a dear customer who is a triathlete. We appreciate the freedom of getting out there and going like the wind! It is handmade with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.  The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  20”h x 13”w x 6”d
    $290.00
  • $785.00

    Blossom Side Table

    ,
    $785.00

    Blossom Side Table

    ,
    This lovely side table is handmade with reclaimed metal. To create this piece, we hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.  The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  23”h x 24”w x 24”d
    $785.00
  • $2,820.00

    Blossom Console Table

    ,
    $2,820.00

    Blossom Console Table

    ,
    We are inspired by the freedom of wide open spaces for wandering and exploring. We create this design that suggests both a compass and a flower blossom in honor of that pursuit.  It is handmade with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.  The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  34”h x 49”w x 12.5”d
    $2,820.00
  • $345.00

    Wild Buffalo

    , ,
    $345.00

    Wild Buffalo

    , ,
    Meet our wild buffalo sculpture, made with reclaimed metal. We enjoy the open fields and hills here at our home, and so we create this buffalo in honor of roaming free. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.  The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  12”h x 19”w x 9”d
    $345.00
  • $165.00

    Gatski Deer Quilt – One of a Kind

    $165.00

    Gatski Deer Quilt – One of a Kind

    This One-Of-A- Kind quilt was created by Jean (Ben's mother). Jean is an avid quilter and fabric artist. She machine quilted an image of our original Gatski Deer Head together with some handsome green and brown flannel fabrics. If you look closely, you can also see the Deer Head in smaller pieces on white blocks surrounded the green flannel. The quilt back is a lovely grey flannel. It's a great size for a throw, accent in your living room, or maybe a kid's bedroom. It's soft and perfect for warming you up on a chilly day. Size: 41.5"h x 56.5"w
    $165.00
  • $2,520.00

    Horseshoe Console Table

    , ,
    $2,520.00

    Horseshoe Console Table

    , ,
    Bring on the luck! We created this statement horseshoe table with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. We make the top with a new piece of US made 11 gauge steel. Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.   Size: 36”h x 48”w x 13”d
    $2,520.00
  • $345.00

    Squirrel

    ,
    $345.00

    Squirrel

    ,
    This fun squirrel sculpture was inspired by our own furry little friends, who often scurry by, right outside our windows. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The paint was hand painted with milk paint. The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  17”h x 6”w x 13”d
    $345.00
  • $980.00

    Orbit Side Table

    , ,
    $980.00

    Orbit Side Table

    , ,
    We created this table from reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.  It is hand-painted with red milk paint. This table complements our Sun Ray Console table. Each table will have subtle variations. They are cut by hand and each piece of metal has slight color differences.  The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  24”h x 24”w x 24”d
    $980.00
  • $330.00

    Flying Pig

    $330.00

    Flying Pig

    We created this Flying Pig entirely from reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and arc weld the flying pig into shape. The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each pig will have subtle variations. We cut them by hand and each piece of metal has slight color differences. Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 16”h x 16”w x 12”d

    $330.00
  • $450.00

    Man in the Moon

    , ,
    $450.00

    Man in the Moon

    , ,

    We were inspired by children’s fairy tale in creating this piece. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The yellow moon was hand painted with milk paint. The metal is sealed with a water-based enamel. Each man will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  19”h x 15”w x 7”d

    $450.00
  • All Craft. A Recipe to Make it Pay

    $4.00

    All Craft. A Recipe to Make it Pay

    by Kate Gatski

    a 44 page ebook, Self-published in 2012 You are talented, creative and thoughtful. You apply artistry and skill to create a unique and beautiful object because you love doing it. But you also want to make a living from your craft, and you can. Your craft can support your life. It can pay all of your bills. It can pay for your insurance and retirement benefits. It can pay for investments, travel and college funds for your kids. Your craft can do what any decent “normal” job can do. This book will not tell you how to run your business. It will not give you detailed instructions on how to sell your work. What it will give you is a recipe to make your craft pay. This recipe is a new, solid foundation for the time you’re already spending on your craft and on growing your business. You will develop a sharper focus on what you want, and what your customers want. You will find new opportunities to bolster your business, you will connect more consistently with the people who will help grow your business, and you will plan for the kind of success that will take you into your retirement. The steps are simple and easy to accomplish, but the combination of the routine is magic. I was raised by a full-time crafter, and I am nearing the ten-year mark as a full-time crafter. My husband, Ben, and I create metal sculptures and furniture from reclaimed materials in rural Pennsylvania. We have three young children. Our business pays all its own expenses and all living expenses for a family of five. It also funds business growth and future business opportunities. I made one resolution at the beginning of this year: be more useful. This book project is a result of that effort.
    $4.00