[email protected] | 570.387.6326 | Free US Shipping on all orders Over $25

Wholesale

Filters

Showing all 70 results

Sculpture Type

Filter by

70 products

  • $230.00

    Cardinal Bird Sculpture

    , ,
    $230.00

    Cardinal Bird Sculpture

    , ,

    Make a striking statement by adding this cardinal table sculpture to your winter setting. This piece is created with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the bird shape. And, the pine cone and pine needles are cut and welded on individually. We paint the bird with all natural milk paint.

    The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations.

    This head can easily be hung with a nail or screw.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    $230.00
  • $545.00

    Dale the Deer

    , ,
    $545.00

    Dale the Deer

    , ,
    [embed]https://www.youtube.com/watch?v=AdxzZxMdDik[/embed]

    We created this Deer Head entirely from reclaimed metal.  The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and grind them smooth. We then hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the head. Finally we mount the head on a recycled corn planter disk.

    The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. The weight is approximately 10lbs Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 22”h x 24”w x 7”d

    $545.00
  • $655.00

    Moose in the Woods

    , ,
    $655.00

    Moose in the Woods

    , ,

    Our “Moose in the Woods” wall sculpture is made with reclaimed metal and wood.  We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hammer and weld the head into shape. Finally, we attach it to a reclaimed corn planter disk. We cut the horns from a large block of wood and shape them by hand.

    This moose is sealed with a water-based enamel.  Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. The weight is approximately 18lbs. Care:  Wipe clean with a damp cloth. You can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  28.5”h x 28”w x 20”d
    $655.00
  • $278.00

    Monte the Moose

    , ,
    $278.00

    Monte the Moose

    , ,

    This moose sculpture is handmade with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 14"h x 16"w x 6"d
    $278.00
  • $585.00

    Deer Head

    ,
    $585.00

    Deer Head

    ,

    We created this Deer Head sculpture with reclaimed metal.  The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and ground smooth. We then hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the head. Finally we mount the head on a recycled corn planter disk.

    The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 18”h x 26”w x 13”d
    $585.00
  • $485.00

    Brown Steer

    ,
    $485.00

    Brown Steer

    ,

    We made this stunning steer head with reclaimed metal and wood.  First we hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the shapes together to form the head. Finally we mount the head on a recycled corn planter disk. We cut the horns from a large block of wood and shape them by hand.

    This steer head is sealed with a water-based enamel. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. It’s weight is approximately 15 lbs. Care:  Wipe clean with a damp cloth. Size: 14”h x 30”w x 12”d
    $485.00
  • $225.00

    Robin

    ,
    $225.00

    Robin

    ,

    We created this darling Robin and Daffodil sculpture to honor the exciting moment when the first Robin of spring is sighted! It is handmade in Pennsylvania from reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The Robin is then hand hammered and arc welded into shape.

    Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a clear enamel. This piece can be placed inside or out.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 15"h x 8"w x 8"d

    $225.00
  • $710.00

    Hourglass Side Table

    , ,
    $710.00

    Hourglass Side Table

    , ,
    This table is handmade with reclaimed metal.  We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter.  The color on this table hand-painted with blue milk paint  We bend the pieces and then top them off with a new piece of US made 11 guage sheet steel. This table can be used indoors or outdoors and is perfect as an accent to your favorite arm-chair or great for holding drinks on the patio. The table has adjustable chrome feet perfect for any surface. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  22.5”h x 13”w x 13”d
    $710.00
  • $665.00

    Cylinder Side Table

    , ,
    $665.00

    Cylinder Side Table

    , ,

    We weld reclaimed sheet metal together to form the base, and use a new piece of US made 11 gauge steel for the top.

    This table can easily be used indoors or outdoors. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 20”h x 10”w x 10”d
    $665.00
  • $330.00

    Diana’s Runner, Female

    , ,
    $330.00

    Diana’s Runner, Female

    , ,
    Size: 19"h x 12"w x 7"d

    Runners can find a certain inner peace with their movement, this sculpture is an homage to that strength. This tabletop sculpture is handmade in rural Pennsylvania with reclaimed metal. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together. Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    The steel is ground smooth by hand, giving the piece a naturally uneven and textured finish.  A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.

    $330.00
  • $865.00

    Kick Side Table

    , ,
    $865.00

    Kick Side Table

    , ,
    Add a kick of handcrafted metal to your beautiful space. We had fun designing this unique table, playing with shapes and forms. It is handmade with with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. It is painted with red milk paint. The top is made with new steel. Care: Wipe clean with a damp cloth. Size: 21"h x 13"w x 17"d
    $865.00
  • $890.00

    Daybreak Side Table

    , ,
    $890.00

    Daybreak Side Table

    , ,
    We love the new beginnings of a daybreak. The turning of our days - from sunrise to sundown - inspired this design, also reminiscent of a gear. This side table is handmade with with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. It is painted with yellow milk paint. The top is made with reclaimed barn wood. Care: Wipe clean with a damp cloth. Size: 25"h x 16"w x 24"d
    $890.00
  • $310.00

    Tudor Moose

    , ,
    $310.00

    Tudor Moose

    , ,

    This Tudor Moose sculpture is handmade in Pennsylvania from reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The Moose is then hand hammered and arc welded into shape. The color is all natural milk paint.

    Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a clear enamel.

    Care:  Wipe clean with a damp cloth.

    Size: 14"h x 19"w x 8"d

    $310.00
  • $2,800.00

    Night Sky Cabinet

    , ,
    $2,800.00

    Night Sky Cabinet

    , ,
    This striking cabinet is handmade with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then weld it into shape. The blue color is hand-painted milk paint. There are two interior heavy metal shelves in this cabinet, and they can be placed in different locations. The metal is sealed with a water-based enamel.  Each cabinet will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. 36”h x 36”w x 17”d
    $2,800.00
  • $375.00

    Bike

    , ,
    We created this striking bike sculpture for the wall, using reclaimed metal.  We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.  It is hand-painted with orange milk paint. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.  The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  17”h x 29”w x 5”d
    $375.00
  • $450.00

    Sly Fox

    , ,
    Our sly fox says, “ GREAT GAT– SKI!,” as he slips through the fields in front of us. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The paint was hand painted with milk paint. The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.   Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.   Size: 18”h x 14”w x 8”d
    $450.00
  • $1,850.00

    Blue Drop Coffee Table

    , ,
    $1,850.00

    Blue Drop Coffee Table

    , ,

    This table  is handmade by us in our rural shop here in Pennsylvania.  Each table features reclaimed metal hand cut and bent into shape. The top is made with a new piece of US made 11 gauge steel. The base is hand-painted with milk paint. The “drop” inside the table can be used to keep a few magazines or books. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  17”h x 46”w x 24”d

    $1,850.00
  • $2,600.00

    X Console With Wood Top

    , ,
    $2,600.00

    X Console With Wood Top

    , ,

    This table  is handmade by with sheets of reclaimed metal.  Each table features reclaimed metal hand cut and bent into shape to form the base. The top is made with a piece of reclaimed barnwood.

    The metal is sealed with a water-based enamel. Each Table will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. You can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store. 34”h x 48”w x 14”d
    $2,600.00
  • $390.00

    Raven for the Wall

    ,
    $390.00

    Raven for the Wall

    ,
    We created this piece with reclaimed, weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each raven will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:   18"h x 20"w x 15"d
    $390.00
  • $542.00

    Murray the Moose

    , ,
    $542.00

    Murray the Moose

    , ,

    We created this moose head wall sculpture with reclaimed metal. The antlers were painted with blue milk paint. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hammer and arc weld the moose into shape. The head is mounted on a recycled corn planter disk.

    The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. The weight is approximately 12lbs. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  19”h x 24”w x 7”d
    $542.00
  • $515.00

    Arthur the Antelope

    , ,
    $515.00

    Arthur the Antelope

    , ,

    This antelope head is handmade in Pennsylvania. It is created from reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The antelope is then hand hammered and arc welded into shape.

    Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This piece can be placed inside or out.

    This head can easily be hung with a nail or screw. It weighs approximately 15lbs.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 28''h x 19''w x 8''d

    $515.00
  • $850.00

    Inward Side Table

    , ,
    $850.00

    Inward Side Table

    , ,
    Size: 24"h x 21"w x 15"d

    This striking side table is handmade in rural Pennsylvania with reclaimed metal. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together. Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    The color is hand-painted with milk paint, giving the piece a naturally uneven and textured finish.  It features a new piece of 11 gauge steel for the top. A clear finish is applied to the entire piece.

    Care:  Wipe clean with a damp cloth.

    $850.00
  • $330.00

    Diana’s Runner, Male

    , ,
    $330.00

    Diana’s Runner, Male

    , ,
    Size:  18"h x 12"w x 7"d

    Runners can find a certain inner peace with their movement, this sculpture is an homage to that strength. This tabletop sculpture is handmade in rural Pennsylvania with reclaimed metal. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together. Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    The steel is ground smooth by hand, giving the piece a naturally uneven and textured finish.  A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.

    $330.00
  • $2,500.00

    Tuck and Roll Console Table

    , ,
    $2,500.00

    Tuck and Roll Console Table

    , ,
    Size: 34"h x 48"w x 14"d

    This statement console is an homage to an asana (a yoga posture). This loose representation was inspired by the inner peace found within simple movements. This table is handmade in rural Pennsylvania with reclaimed metal. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together. Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    This piece features a reclaimed barn wood top that is in its primitive state. Minimal finishing to the wood to preserve its natural, aged character.

    The color is hand-painted with milk paint, giving the piece a naturally uneven and textured finish.  A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    $2,500.00
  • $470.00

    Lotus Flower Wall Sculpture

    , ,
    $470.00

    Lotus Flower Wall Sculpture

    , ,
    Size:  17"h x 32"w x 6"d

    A symbol of hope and strength, let this lotus flower be a reminder of the courage within you. This statement wall sculpture is handmade in rural Pennsylvania with reclaimed metal. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.

    Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    The color is hand-painted with milk paint, giving the piece a naturally uneven and textured finish.  A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    This can easily be hung with a nail or screw.

    $470.00
  • $285.00

    Peace Dove

    ,
    $285.00

    Peace Dove

    ,
    Size: 14"h x 12"w x 8"d

    Let this dove and olive branch remind you of the peace in our beautiful world. This tabletop sculpture is handmade in rural Pennsylvania with reclaimed metal. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.

    Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    The steel on the dove is ground smooth, giving the piece a polished and naturally uneven finish.  A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.

     
    $285.00
  • $535.00

    Moon Galaxy

    , ,
    $535.00

    Moon Galaxy

    , ,

    This wall art sculpture is handmade in rural Pennsylvania with reclaimed metal. It features a hand-hammered star dangling from the center. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.

    We created this piece as part of our new "Looking Up" collection celebrating the hope and joy beyond the horizon.

    Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    The color is hand-painted with milk paint, giving the piece a naturally uneven and textured finish.  A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    Size:  23"h x 19"w x 5"d

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.

    $535.00
  • $535.00

    Droplet

    , ,
    $535.00

    Droplet

    , ,

    This wall art sculpture is handmade in rural Pennsylvania with reclaimed metal. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.

    We created this piece as part of our new "Looking Up" collection celebrating the hope and joy beyond the horizon.

    Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    The color is hand-painted with milk paint, giving the piece a naturally uneven and textured finish.  A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    Size:  24"h x 24"w x 7"d

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.

    $535.00
  • $535.00

    Cloud Burst

    , ,
    $535.00

    Cloud Burst

    , ,

    This wall art sculpture is handmade in rural Pennsylvania with reclaimed metal. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.

    We created this piece as part of our new "Looking Up" collection celebrating the hope and joy beyond the horizon.

    Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    The color is hand-painted with milk paint, giving the piece a naturally uneven and textured finish.  A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    Size:  21"h x 23"w x 5"d

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.

    $535.00
  • $2,500.00

    Cloud Console

    , ,
    $2,500.00

    Cloud Console

    , ,

    This unique statement table was inspired by the billowing clouds in the sky. It is part of our new, "Looking Up" collection celebrating the hope and joy beyond the horizon.

    We made this table by hand cutting reclaimed sheet metal and welding it into shape. The color is blue milk paint which is hand-painted on the base. The top is made with new steel.

    Each table will have unique variations, no pieces of metal will wear alike.

    Size:  33"h x 46"w x 14"d

    Care: Wipe clean with a damp cloth.

    $2,500.00
  • $520.00

    Blue Moon

    , ,
    $520.00

    Blue Moon

    , ,

    More than once in a blue moon you can enjoy your outdoor garden sculpture! This unique piece is handmade in rural Pennsylvania with reclaimed metal. It features a metal moon flower blossom dangling from the center. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.

    We created this piece as part of our new "Looking Up" collection celebrating the hope and joy beyond the horizon.

    Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    The color is hand-painted with milk paint, giving the piece a naturally uneven and textured finish.  A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    Size:  36"h x 19"w x 9"d

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.

    $520.00
  • $325.00

    Home in the Heart

    , ,
    $325.00

    Home in the Heart

    , ,

    This Heart Home is handmade in rural Pennsylvania with reclaimed metal.

    The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.

    Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    The color is hand-painted with milk paint, giving the piece a naturally uneven and textured finish.  A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    Size: 22"h x 10"w x 6"d

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store.

    $325.00
  • $920.00

    Book Table

    , ,
    $920.00

    Book Table

    , ,

    Bibliophiles unite! Stack your books, grab a drink, settle in by your Book Table and have a good read.

    The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.  This piece features a reclaimed barn wood top that is in its primitive state. Minimal finishing to the wood to preserve its natural, aged character.

    Each piece will have its own subtle differences; they are cut, hammered, and built by hand. A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    Size:  26"h x 24"w x 16"d

    Care:  Wipe clean with a damp cloth.

    $920.00
  • $360.00

    Eagle

    , ,

    This Eagle is handmade in rural Pennsylvania with reclaimed metal. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.

    Each piece will have its own subtle differences; they are cut, hammered, and built by hand. The weathered steel has its own imperfections. No two pieces of metal will wear alike. A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    Size:  15"h x 20"w x 9"d

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.

    $360.00
  • $440.00

    Earth Person

    , ,
    $440.00

    Earth Person

    , ,

    This Earth Person is handmade in rural Pennsylvania with reclaimed metal. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.

    Each piece will have its own subtle differences; they are cut, hammered, and built by hand. The weathered steel has its own imperfections. No two pieces of metal will wear alike. A clear finish is applied to the entire piece.

    Size: 21"h x 12"w x 8"d

    Each Gatski is a blend of imperfect materials and capable hands.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.

    $440.00
  • $495.00

    Shooting Star

    , ,
    $495.00

    Shooting Star

    , ,

    This Shooting Star is handmade in rural Pennsylvania with reclaimed metal.

    The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.

    Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    The color is hand-painted with milk paint, giving the piece a naturally uneven and textured finish.  A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    This can easily be hung with a nail or screw.

    Size:  15"h x 31"w x 5"d

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.

    $495.00
  • $635.00

    My Sunshine

    , ,
    $635.00

    My Sunshine

    , ,

    This Sunshine is handmade in rural Pennsylvania with reclaimed metal.

    The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together.

    Each piece will have its own subtle differences; they are cut, hammered, and built by hand.

    The color is hand-painted with milk paint, giving the piece a naturally uneven and textured finish.  A clear finish is applied to the entire piece.

    Each Gatski is a blend of imperfect materials and capable hands.

    This can easily be hung with a nail or screw.

    Size:  36"h x 36"w x 3.5"d

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.

    $635.00
  • $210.00

    Rabbit

    , ,

    This Rabbit sculpture is handmade in Pennsylvania from reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The Rabbit is then hand hammered and arc welded into shape.

    Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a clear enamel. This piece can be placed inside or out.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 9"h x 12"w x 6"d

    $210.00
  • $695.00

    Heart and Home Wall Sculpture

    , ,
    $695.00

    Heart and Home Wall Sculpture

    , ,
    Our home is truly where our heart is. But, we also believe the heart is where the home can be. We created this wall sculpture in celebration of that love that can be found in all places. This sculpture is handmade is made with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. It is painted with red milk paint. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 32"h x 30"w x 4"d
    $695.00
  • $2,500.00

    Red Together Console Table

    , ,
    $2,500.00

    Red Together Console Table

    , ,
    Inspired by love and being together! This console table is a nod to the heart, and the love it represents. We created the overarching forms that lean-on, and are connected together. We made this table by hand cutting reclaimed sheet metal and welding it into shape. The color is red milk paint which is hand-painted on the base. The top is made with new steel. Each table will have unique variations, no pieces of metal will wear alike. We are always happy to email you a photo prior to shipping- simply contact us. Care: Wipe clean with a damp cloth. Size: 31"h x 48"w x 14"d
    $2,500.00
  • $460.00

    Sunflower Wall Sculpture

    , ,
    $460.00

    Sunflower Wall Sculpture

    , ,

    This Wall Sunflower is handmade in Pennsylvania from reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. Each petal is hand hammered and arc welded into shape.

    Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a clear enamel. This piece can be placed inside or out.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 25"h x 25"w x 2"d

    $460.00
  • $510.00

    Cat Sculpture

    ,
    $510.00

    Cat Sculpture

    ,

    This Cat sculpture is handmade in Pennsylvania from reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The Cat is then hand hammered and arc welded into shape. The color is created with natural milk paint.

    Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a clear enamel. This piece can be placed inside or out.

    Care:  Wipe clean with a damp cloth.

    Size:  21"h x 12"w x 16"d

    $510.00
  • $2,550.00

    Counterbalance Console Table

    , ,
    $2,550.00

    Counterbalance Console Table

    , ,

    Create an artistic entryway (or living space) with this strong and elegant console table. This unique console table was handmade here in Pennsylvania. To create the body of the table we hand cut reclaimed sheet metal and weld it into shape. To create the wood top we hand cut, plane and sand reclaimed wood from an old barn.

    Each table will have unique variations, no pieces of metal will wear alike.  We are always happy to email you a photo prior to shipping- simply contact us.

    This table is approximately 70lbs.

    Size:  34"h x 48"w x 14"d

    Care: Wipe clean with a damp cloth.

    $2,550.00
  • $490.00

    Cat Wall Sculpture

    , ,
    $490.00

    Cat Wall Sculpture

    , ,

    Make a statement on your wall with this fun cat wall sculpture. It is created with reclaimed metal. We hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the head. We paint it with all natural milk paint.

    The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations.

    This head can easily be hung with a nail or screw.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size:  20"h x 24"w x9"d

    $490.00
  • $525.00

    Bat Sculpture

    , , ,
    We had fun creating this unique bat sculpture. We imagined this for the garden but it would be fun in any indoor or outdoor space. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each anchor will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. 39”h x 29”w x 8”d
    $525.00
  • $610.00

    Roxy the Reindeer

    , ,
    $610.00

    Roxy the Reindeer

    , ,
    Meet Roxy! We created this animal head entirely from reclaimed metal.  The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and grind them smooth. We then hand draw the head pattern on the metal with soapstone and cut it with a hand held plasma cutter. Next we weld the shapes together to form the head. Finally we mount the head on a recycled corn planter disk. The color is hand-painted milk paint. The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. The weight is approximately 10lbs Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. 26”h x 22”w x 13”d
    $610.00
  • $630.00

    Star Table

    , ,
    $630.00

    Star Table

    , ,
    This lovely side table is handmade with reclaimed metal. It is in a crescent moon shape. To create this piece, we hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.  The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. 20”h x 19”w x 14”d
    $630.00
  • $255.00

    Anchor

    , ,
    This anchor sculpture is handmade with reclaimed metal steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. It can be used as a simple decorative piece or as a wine bottle holder. The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each anchor will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. 16”h x 14”w x 12”d
    $255.00
  • $550.00

    Whale

    , ,
    This whale sculpture is handmade with reclaimed metal steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The color is milk paint we apply by hand. The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each whale will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. 24”h x 33”w x 6”d
    $550.00
  • $565.00

    Deputy Dog

    , , ,
    This fun dog sculpture is handmade with reclaimed metal steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each dog will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  25”h x 7”w x 14”d
    $565.00
  • $290.00

    Runner

    , ,
    Go! Go! Go! We were inspired to create this sculpture by a dear customer who is a triathlete. We appreciate the freedom of getting out there and going like the wind! It is handmade with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.  The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  20”h x 13”w x 6”d
    $290.00
  • $345.00

    Wild Buffalo

    , ,
    $345.00

    Wild Buffalo

    , ,
    Meet our wild buffalo sculpture, made with reclaimed metal. We enjoy the open fields and hills here at our home, and so we create this buffalo in honor of roaming free. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences.  The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  12”h x 19”w x 9”d
    $345.00
  • $2,520.00

    Horseshoe Console Table

    , ,
    $2,520.00

    Horseshoe Console Table

    , ,
    Bring on the luck! We created this statement horseshoe table with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. We make the top with a new piece of US made 11 gauge steel. Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.   Size: 36”h x 48”w x 13”d
    $2,520.00
  • $980.00

    Orbit Side Table

    , ,
    $980.00

    Orbit Side Table

    , ,
    We created this table from reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.  It is hand-painted with red milk paint. This table complements our Sun Ray Console table. Each table will have subtle variations. They are cut by hand and each piece of metal has slight color differences.  The metal is sealed with a water-based enamel. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  24”h x 24”w x 24”d
    $980.00
  • $450.00

    Man in the Moon

    , ,
    $450.00

    Man in the Moon

    , ,

    We were inspired by children’s fairy tale in creating this piece. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The yellow moon was hand painted with milk paint. The metal is sealed with a water-based enamel. Each man will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  19”h x 15”w x 7”d

    $450.00
  • $875.00

    Wishbone Table

    , ,
    $875.00

    Wishbone Table

    , ,
    This side table is made from reclaimed steel. It is handmade in Pennsylvania by Ben Gatski. Each piece of steel was hand cut and welded together. The base was hand painted with red milk paint. Care: Wipe clean with a damp cloth. Size: 21"h x 24.5"w x 24.5"d
    $875.00
  • $225.00

    Wall Turtle

    , ,
    $225.00

    Wall Turtle

    , ,

    We created this lovely turtle from reclaimed metal. The metal we used is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each moth will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  18”h x 12”w x 2.5”d
    $225.00
  • $2,500.00

    Swoop Console Table

    , ,
    $2,500.00

    Swoop Console Table

    , ,
    [embed]https://www.youtube.com/watch?v=1dRZiZ4THUM[/embed]

    Handmade in Pennsylvania by Ben Gatski, this table is made with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. It is painted  with blue milk paint. We make the top with a new piece of US made 11 gauge steel.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 34"h x 48"w x 13"d
    $2,500.00
  • $760.00

    Swirl Table

    , ,
    $760.00

    Swirl Table

    , ,
    We create this unique table with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. It is painted  with red milk paint. We make the top with a new piece of US made 10 gauge steel. Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  27”h x 19”w x 19”d
    $760.00
  • $460.00

    Sir Blue

    , ,

    Hat's off to you! This darling man whom we call, "Sir Blue" is handmade in Pennsylvania by Ben Gatski. The metal we use is from weathered steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.

    The metal is sealed with a water-based enamel. Each man will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 21"h x 17"w x 10"d
    $460.00
  • $370.00

    Sheep

    , ,

    This sheep sculpture is handmade with reclaimed metal steel. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape.

    The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each sheep will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 12"h x 20"w x 5"d
    $370.00
  • $2,500.00

    Sway Console Table

    , ,
    $2,500.00

    Sway Console Table

    , ,

    Handmade in Pennsylvania by Ben Gatski, this table is made with reclaimed metal. We made the base by hand hammering flat metal into shape and welding it together. It is painted  with red milk paint. We make the top with a new piece of US made 11 gauge steel.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size:  33.5"h x 48"w x 12"d
    $2,500.00
  • $2,450.00

    Red X Console Table

    ,
    $2,450.00

    Red X Console Table

    ,
    This table  is handmade by us here in rural Pennsylvania with sheets of reclaimed metal.  Each table features reclaimed metal hand cut and bent into shape to form the base. The top is made with a new piece of US made 11 gauge steel. The metal is sealed with a water-based enamel. This piece can be placed inside or out. Each Table will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store. 33”h x 48”w x 14”d
    $2,450.00
  • $3,900.00

    Moonlight Credenza

    , ,
    $3,900.00

    Moonlight Credenza

    , ,

    We created this piece with reclaimed metal and wood. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld it into shape. The blue was hand painted with milk paint.

    There is one interior shelf, and two narrow niches on each side. The metal is sealed with a water-based enamel. Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. Care: Wipe clean with a damp cloth. Size:  32”h x 60”w x 24.5”d
    $3,900.00
  • $1,725.00

    Large Deer Head

    , ,
    $1,725.00

    Large Deer Head

    , ,

    Bring home a real trophy. We created this Deer Head entirely from reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. We then hand hammer and weld the head into shape.  The antlers start out as flat pieces of rusty metal, we hand hammer them into shape and grind them smooth. They are made shiny with a hand held grinder. Finally, we attach it to a reclaimed corn planter disk.

    The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. They are cut by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. The weight is approximately 15lbs. Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 37.5”h x 34.5w x 29”d
    $1,725.00
  • $558.00

    Elk Head

    , ,
    $558.00

    Elk Head

    , ,

    We created this Elk head sculpture with reclaimed metal. We hand draw the pattern on the metal with soapstone and cut it with a hand held plasma cutter. The antlers start out as flat pieces of rusty metal. We hand hammer them into shape and grind them smooth.  Finally we mount the head on a recycled corn planter disk.

    The metal is sealed with a water-based enamel. This piece can be hung inside or out. Each head will have subtle variations. We cut them by hand and each piece of metal has slight color differences. This head can easily be hung with a nail or screw. It’s weight is approximately 15 lbs Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 26''h x 16''w x 13''d
    $558.00
  • $735.00

    Blue Circle Table

    ,
    $735.00

    Blue Circle Table

    ,

    We created this table by hand hammering flat metal into shape and welding it together. We cut out the circle shape and hammer it into form. We then hang a recycled piece of chain from a harvesting machine in the middle, and hand paint the circle with blue milk paint. We make the top with a new piece of US made 10 gauge steel.

    It can be used indoors or outdoors – perfect as side table or great for holding drinks on the patio. Each table will have unique variations. They are cut by hand and each piece of metal has slight color differences. Weight:  approximately 30lbs Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store. Size: 28”h x 20”w x 18”d
    $735.00
  • $2,500.00

    Big O Console – Rust & Blue

    ,
    $2,500.00

    Big O Console – Rust & Blue

    ,

    Inspire your home with this statement piece - a console, entry or sofa table made with reclaimed steel.  The colors on this table are hand-painted with milk paint. Each table features a piece of recycled steel that was hand rolled and welded to form the base, with a new piece of US made 10 gauge steel top. A clear coating was applied to the entire table for a shiny finish.

    Please do inquire for custom colors (in the third photo, you can see a red table being made).

    Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 33”h x 42”w x 14”d

    $2,500.00
  • $450.00

    Bernie the Bear

    ,
    $450.00

    Bernie the Bear

    ,

    This Bear Head sculpture is handmade in Pennsylvania from reclaimed metal. The pattern is hand drawn on the metal with soapstone and cut with a hand held plasma cutter. The Bear is then hand hammered and arc welded into shape.

    Each piece will have subtle variations. They are cut by hand and each piece of metal has slight color differences. The metal is sealed with a water-based enamel. This piece can be placed inside or out.

    This head can easily be hung with a nail or screw. It weighs approximately 10lbs.

    Care:  Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look [entirely optional] by applying a clear metal enamel, available in a spray can at your local hardware store.

    Size: 17''h x 16''w x 14''d

    $450.00
  • $2,500.00

    Big O Console Table

    ,
    $2,500.00

    Big O Console Table

    ,
    Inspire your home with this statement piece- a console, entry or sofa table made with reclaimed steel. The colors on this table are hand-painted with milk paint. Each table features a piece of recycled steel that was hand rolled and welded to form the base, with a new piece of US made 10 gauge steel top. A clear coating was applied to the entire table for a shiny finish. size: 33”h x 42”w x 14”d Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny metal look (optional) by applying a clear metal enamel, available in a spray can at your local hardware store.
    $2,500.00